Life sciences · Medical device
NetSuite for medical device companies
NetSuite can run an FDA-regulated medical device company, but only when it’s implemented for one. BSP configures and extends NetSuite for QMSR and ISO 13485 record-keeping, 21 CFR Part 11 electronic signatures, and lot and serial traceability, then delivers a risk-based validation package with the implementation, so the system is validated when you go live.
BSP is an Oracle NetSuite Solution Provider and Alliance Partner with 150+ life sciences implementations and ten applications built to run inside NetSuite.
150+
Life sciences NetSuite implementations
10
Life sciences applications built to run inside NetSuite
8
Documents in BSP’s FDA validation package
2025
NetSuite Alliance Spotlight · Medical Devices & Equipment
Validation
Can NetSuite be validated for a medical device company?
Yes. Because NetSuite is a cloud platform, validation focuses on how your account is configured and used, and on how you assess each NetSuite release, rather than on servers you no longer own. BSP scopes, prices and delivers a risk-based validation package as part of the implementation, so validation is complete at go-live instead of becoming a project after it.
A RISK-BASED FDA SOFTWARE VALIDATION PACKAGE
01 VALIDATION PROTOCOL
02 SOFTWARE REQUIREMENTS SPECIFICATION
03 NETWORK DIAGRAM
04 RISK ANALYSIS
05 21 CFR PART 11 COMPLIANCE ANALYSIS
06 TEST PLAN + TEST SPECIFICATIONS
07 REQUIREMENTS TRACEABILITY MATRIX
08 FINAL VALIDATION REPORT
What changed in 2026
QMSR retired the term “device history record.” It didn’t retire the record.
The FDA’s Quality Management System Regulation took effect on February 2, 2026, bringing ISO 13485:2016 into 21 CFR Part 820. The labels device master record and device history record are gone from the regulation. The obligation to show how each device or lot was built, from which components, by whom and to which revision, is not. For most device companies, that evidence lives in the ERP.
So the question is no longer where the DHR is kept. It’s whether your records are complete, controlled and retrievable on request. That is a system design decision, and it gets made during implementation.
WHAT YOUR ERP SHOULD PRODUCE ON REQUEST
01 PRODUCTION RECORDS FOR EACH DEVICE OR LOT
02 FORWARD + BACKWARD LOT AND SERIAL GENEALOGY
03 SUPPLIER APPROVAL STATUS AT RECEIPT
04 INSPECTION + RELEASE STATUS BY LOT
05 COMPLAINTS LINKED TO NCR + CAPA
06 PART 11 SIGNATURES WITH AUDIT TRAIL
07 DOCUMENT REVISION + TRAINING HISTORY
08 EQUIPMENT CALIBRATION RECORDS
Requirement by requirement
How NetSuite meets medical device requirements
Native NetSuite covers the financial, inventory, order and manufacturing core. The regulated controls come from how the account is configured and from BSP applications built on the platform. Here is where each requirement lives.
| REQUIREMENT | WHERE IT COMES FROM | HOW IT’S HANDLED IN NETSUITE WITH BSP |
|---|---|---|
| Production records for each device or lot | QMSR · ISO 13485 7.5.1 | BSP Device History Record and Activity Steps capture what was built, with which components and revision, on the assembly build itself. |
| Lot and serial traceability | QMSR · ISO 13485 7.5.9 | Consistent lot and serial numbering with BSP Lot Generator, inventory by lot and status, and genealogy from receipt to shipment for recall scoping. |
| Electronic records and signatures | 21 CFR Part 11 | BSP Electronic Signature for controlled approvals, alongside NetSuite’s system audit trails and role-based access. |
| Supplier controls | ISO 13485 7.4 | BSP Approved Suppliers, vendor lot approval alerts and inspection at receiving. |
| Nonconforming product and release | ISO 13485 8.3 | Lot status control, automatic quarantine and expiration, and shipment blocks for unapproved lots, from the Medical Device & Biotech Bundle. |
| Complaints, NCR and CAPA | ISO 13485 8.2.2 · 8.5.2 | The BSP eQMS Bundle links each complaint to NCRs, CAPAs and the affected products or lots. |
| Document control and training | ISO 13485 4.2.4 · 6.2 | eQMS document control (DCO) and training, with retraining assigned when a controlled document changes. |
| Design and item changes | ISO 13485 7.3.9 | BSP Item Revisions keep the revision that was built on every transaction and record. |
| Monitoring and measuring equipment | ISO 13485 7.6 | BSP Equipment Maintenance and Calibration schedules and records the work. |
| Validation of the ERP itself | ISO 13485 4.1.6 · Part 11 | A risk-based validation package, scoped and delivered with the implementation. |
Clause references are to ISO 13485:2016 as incorporated by QMSR. They show where each control is expected; they don’t replace your quality team’s own assessment.
Who we work with
Device companies at the point where the ERP starts to matter.
We’re usually brought in at one of five moments. Each one changes what the implementation has to get right first.
GO DEEPER
Pre-commercial to first shipments
Leaving QuickBooks and spreadsheets before the first production lots ship, with traceability and validation set up from the start rather than retrofitted.
Outgrowing a legacy or on-premise ERP
Replacing a system that has to be revalidated with every upgrade, or that can’t produce a traceability report without IT.
Contract manufacturers and OEM suppliers
Lot-controlled production for customers who audit you, with supplier, inspection and release records to match.
Going public, raising capital or being acquired
When the ERP has to stand up to diligence, SOX controls and investor reporting as well as an FDA inspection.
Already on NetSuite, but not built for this
Live on NetSuite without the controls an auditor expects. We add them to the account you already have, without starting over.
Customer story · Cytrellis Biosystems
Told the cloud couldn’t be validated. Live with validation complete.
A medical device maker running an on-premise system sized for more than 120 people, after deliberately resizing to about 30, and revalidating with every upgrade, moved to NetSuite in a single cutover. The 250-hour validation package was complete at go-live, within two weeks of the date Cytrellis set before choosing a partner.
BEFORE
10 DAYS TO PULL A SHIPPING REPORT
REVALIDATION WITH EVERY UPGRADE, TWICE A YEAR
DELIVERED
250-HOUR FDA VALIDATION PACKAGE
SINGLE CUTOVER, PREMIUM + MANUFACTURING
LOT + SERIAL TRACEABILITY
SALESFORCE INTEGRATED FOR THE FIRST TIME
RECOGNITION
NETSUITE ALLIANCE PARTNER SPOTLIGHT · LIFE SCIENCES
Frequently asked questions
Medical device NetSuite questions, answered.
Short answers to what quality, operations and finance leaders ask us first.
Is NetSuite a good ERP for medical device companies?
Yes, for most device manufacturers and distributors from early commercial stage through multi-entity growth. NetSuite covers financials, inventory, manufacturing, order management and CRM on one cloud platform. The regulated controls a device company needs, such as production records, Part 11 signatures, supplier approval and CAPA, come from how it’s configured and from industry applications like BSP’s that run inside NetSuite.
Is NetSuite compliant with FDA QMSR and 21 CFR Part 11?
No ERP is compliant on its own; compliance belongs to the manufacturer’s quality system. NetSuite provides audit trails, role-based access and electronic records. With BSP’s Electronic Signature application, a validated configuration and documented procedures, it supports Part 11 and the record-keeping QMSR and ISO 13485 require.
Can NetSuite be validated?
Yes. BSP delivers a risk-based validation package with the implementation: protocol, software requirements, network diagram, risk analysis, Part 11 compliance analysis, test plan and specifications, traceability matrix and final report. Validation is complete at go-live, not deferred.
Do medical device companies still need a device history record after QMSR?
The term left the regulation on February 2, 2026. The requirement to keep production records for each device or batch did not; it now sits in ISO 13485. BSP’s Device History Record application compiles those records in NetSuite, whatever your procedures call them.
How does NetSuite handle lot and serial traceability for a recall?
Each lot or serial number is tracked from receipt through assembly to shipment. With lot status control, quarantine and shipment blocks, you can scope a recall by component lot, finished lot or customer, and stop affected product from shipping.
What does BSP add that standard NetSuite doesn’t?
Ten life sciences applications, including Device History Record, Electronic Signature, Item Revisions, Approved Suppliers and Lot Generator, plus two bundles: the eQMS Bundle (document control, training, CAPA, NCR, complaints) and the Medical Device & Biotech Bundle (lot status control, quarantine, expiration and shipment blocks). Because they run inside NetSuite, quality records sit on the same transactions your team already uses.
How long does a NetSuite implementation take for a device company?
It depends on scope: manufacturing complexity, number of entities, integrations and validation depth. Validation runs alongside the build rather than after it, so it doesn’t add a phase at the end. You get a scoped timeline before the project starts.
We’re already on NetSuite. Can BSP help?
Yes. Many device companies come to us live on NetSuite but missing the controls an auditor expects. We add BSP applications, validation and fixes to the existing account, and Operis provides ongoing managed services after that.
Talk to someone who knows what an investigator will ask for.
Evaluating NetSuite, replacing a system you revalidate with every upgrade, or already live and missing the controls: our life sciences team has done it before, and can show you the documentation to prove it.